From Avo to Vista

This Sunday I will say goodbye to the first lighting console that I ever programmed on.  We have not had too much trouble with the Avolites Pearl console other then floppy drives going out.  So why make the change?  We have just made a switch in the way that we program.  When I started working with the lights it was very manual and not much programming.  Over the time that we have gone to the other extreme.  Today we program cue to cue for all three services.  Avo has a theater stack mode, but it is not the most user friendly to work with and I started looking for something different.  I spent much time reviewing products and got as many recommendations as I could.  All roads seemed to lead to one place, Jands Vista products.

There is lots to love about the Vista product line.  You can start with a PC or Mac based solution with just 128 DMX channels or have a large console with 8 or more DMX universes.  We decided that it was a full range solution that we could standardize on campus wide. It also gives us the ability to make changes from our workstations.  We had a way to program the Avo on the computer, but it is very slow process.  Vista is almost as fast to program on your computer as it is on the console.

So we bit the bullet and purchased a Vista T2 for the worship center and a Vista S1 for both the new gym and the LYF center.  Now our lighting operators should be comfortable in all the rooms with lighting on campus.  All should be in on Monday and ready to go for next Sunday.  Just remember, is it Jands Vista and not Microsoft Windows Vista.  Friends don’t let friends use Windows let alone Windows Vista.